??ͷ??

产品中心 Your present location: ??ͷ?? >> Products >> Product DetailsProducts

    Product Overview:
    采用IS型离心泵之性能参数,在一般立式泵的基础上简化结构设计而成。 ISG series vertical single-stage centrifugal pumps adopt the performance parameters of IS-type centrifugal pumps and simplify the structural design based on general vertical pumps. According to the different temperature and medium, IRG type hot water centrifugal pump, IHG type stainless steel chemical pump, YG type centrifugal oil pump are derived. This series of products are characterized by compact structure, few types of spare parts, and convenient use and maintenance .





      YG series vertical pipeline centrifugal oil pump (explosion-proof type) IHG series vertical pipeline chemical pump

    Product features:

    1. The pump has a vertical structure, with the same inlet and outlet diameters, and is located on the same centerline. It can be installed in the pipeline like a valve, with a compact shape and a small footprint. It can be placed outdoors if a motor protective cover is added use.
    2. The impeller is directly installed on the extension shaft of the motor, and the axial dimension is short.
    3. The shaft seal adopts a mechanical seal, which can have different material configurations according to the medium, which can effectively extend the service life of the mechanical seal according to the actual situation.
    4. Convenient installation and maintenance, no need to dismantle the pipe road system, as long as the pump joint seat nut is removed, all rotor components can be extracted.
    5. Parallel operation mode can be adopted according to the requirements of flow usage.
    6. The vertical and horizontal installation of the pump can be adopted according to the requirements of pipeline layout.

    Third, the main use:

    1. ISG vertical pipeline centrifugal pump: for transporting clear water or other liquids with physical and chemical properties similar to clear water, the temperature of the medium to be transported T < 120 ℃ .

    2. IRG vertical hot water circulation pump: the pump for circulating hot water in various industries or the pump for urban heating system circulation, the temperature of the medium being conveyed T < 120 ℃ Due to the development of mechanical seal technology, IRG and ISG pumps are common today, and there is no need to distinguish between the models.
    3. IHG vertical pipeline chemical pump: It is used to transport liquids that do not contain solid particles (or traces of fine particles, please consult technical staff for details). They are corrosive and have a viscosity similar to water. The temperature of the transported medium is- 20 ℃ ~ + 120 ℃ .
    4. YG type vertical pipeline centrifugal oil pump is used to transport gasoline, kerosene, diesel and other light petroleum products. The temperature of the medium to be transported is: -20 ℃ ~ + 120 ℃, copper impeller can be configured as required .

    Working conditions:
    1. Inlet pressure≤0.6MPa.
    2.Ambient temperature < 40 ℃ , Relative humidity <95%.
    3. The volume content of solid particles in the conveyed medium does not exceed 0.1% per unit volume, and the particle size is <0. 2mm .

    如被输送介质带有细小颗粒,请在订货时说明,以便我司选用相对耐磨的机械密封。 Note: If the conveyed medium has fine particles, please specify when ordering so that our company can choose a relatively wear-resistant mechanical seal.

    Five, model meaning:


    沪ICP备11024687号 上海上久泵业制造有限公司 Copyright Shanghai ICP No. 11024687 Shanghai Shangjiu Pump Manufacturing Co., Ltd. Shanghai Public Network Security No. 31010702002167

    Contact: Mr. Lin Tel: 021-62821119 上海珍岛 Technical Support: Shanghai Zhendao

    1816158
    656530217
    758731758
    401302027
    ֲ ƴ ը Τ