??ͷ??

产品中心 Your present location: ??ͷ?? >> Products >> Product DetailsProducts

      Product Overview:
      采用IH型离心泵之性能参数,在一般立式泵的基础上简化结构设计而成。 The IHG stainless steel vertical chemical centrifugal pump uses the performance parameters of the IH centrifugal pump and is simplified in structure design based on the general vertical pump. Based on the different temperature and medium, IHG type stainless steel chemical pumps are derived on the basis of ISG type (materials are: 201 stainless steel, 304 stainless steel, 316L stainless steel). This series of products are characterized by compact structure, few types of spare parts, and convenient use and maintenance .

             IHG stainless steel vertical chemical centrifugal pump

        Product features:
        1. The pump has a vertical structure, with the same inlet and outlet diameters, and is located on the same centerline. It can be installed in the pipeline like a valve, with a compact shape and a small footprint. It can be placed outdoors if a motor protective cover is added use.
        2. The impeller is directly installed on the extension shaft of the motor, and the axial dimension is short.
        3. The shaft seal adopts a mechanical seal, which can have different material configurations according to the medium, which can effectively extend the service life of the mechanical seal according to the actual situation.
        4. Convenient installation and maintenance, no need to dismantle the pipe road system, as long as the pump joint seat nut is removed, all rotor components can be extracted.
        5. Parallel operation mode can be adopted according to the requirements of flow usage.
        6. The vertical and horizontal installation of the pump can be adopted according to the requirements of pipeline layout.


        Third, the main use:

        IHG vertical pipeline chemical pump: It is used to transport liquids without solid particles (or traces of fine particles, please consult technical staff for details). It has a certain corrosive liquid with viscosity similar to water. 20 ℃ ~ + 120 ℃ .

        Working conditions:
        1. Inlet pressure≤0.6MPa.
        2.Ambient temperature < 40 ℃ , Relative humidity <95%.
        3. The volume content of solid particles in the conveyed medium does not exceed 0.1% per unit volume, and the particle size is <0. 2mm .


        如被输送介质带有细小颗粒,请在订货时说明,以便我司选用相对耐磨的机械密封。 Note: If the conveyed medium has fine particles, please specify when ordering so that our company can choose a relatively wear-resistant mechanical seal.


      Five, model meaning:

    沪ICP备11024687号 上海上久泵业制造有限公司 Copyright Shanghai ICP No. 11024687 Shanghai Shangjiu Pump Manufacturing Co., Ltd. Shanghai Public Network Security No. 31010702002167

    Contact: Mr. Lin Tel: 021-62821119 上海珍岛 Technical Support: Shanghai Zhendao

    1816158
    656530217
    758731758
    401302027
    ֲ ƴ ը Τ