GDL type vertical multistage pipeline centrifugal pump
Product Category: Multistage Pump
Caliber (import / export): φ25-φ150
Flow range: 2-160 (m3 / h)
Head range: 24-200 (m)
Details: (click on the title below)
GDL type vertical multistage pipeline centrifugal pump suction and discharge ports are on the same straight line. The rotor component is composed of shaft, impeller, impeller baffle, shaft sleeve and other parts. The water inlet section, middle section and water outlet section are connected by tension bolts. The shaft seal is mechanically sealed and lubricated and cooled with pressure water from the balance chamber. It is an ideal pump for transporting hot and cold water or liquids with similar physical and chemical properties to water.
Scope of application:
It is widely used in the circulation and pressurization of hot and cold water in high-pressure operating systems, parallel water supply of multiple pumps in high-rise buildings, fire protection, boiler feed water and cooling water systems, and the transmission of various washing fluids.
1. Pipe type, easy installation.
2. The range of head is larger than that of single-stage pump.
3. The cylinder of the pump body is made of stainless steel and has a beautiful appearance.
4. The shaft seal is a mechanical seal. If the user uses it properly, it has a relatively good service life, and there is no trouble of leakage of the packing seal.
5. The flow channel has been redesigned, and the hydraulic noise during operation is small.
6, vertical structure, small footprint.
Speed: 2900r / min;
Temperature range: -15- +
Working pressure: ≤2.5Mpa.
Five, model meaning: